Mechanical Engineering

Books and Chapters

Trevelyan, J.P. Coordination in Mechatronic Engineering Work, Mechatronics and Machine Vision in Practice, ed John Billingsley, Robin Bradbeer, Berlin, Heidelberg, Springer, pp 51-61 (2008)

Trevelyan, J.P. Research Challenges, Humanitarian Demining: Innovative Solutions and the Challenges of Technology, ed Maki K. Habib, Vienna, I-Tech Education and Publishing, pp 57-68 (2008)

Trevelyan, J.P., Kang, S.C. and Hamel, W.R. Robotics in Hazardous Applications, Springer Handbook of Robotics, ed Bruno Siciliano, Oussama Khatib, Berlin, Heidelberg, Springer, 1: pp 1101-1126 (2008)

Journal Articles

Cho, G.B., Kim, T.Y., Yu, C.A., Liu, Y. and Nam, T.H. Transformation behaviour of Ti-Ni-Cu-Mo alloys, Journal of Alloys and Compounds, 449: pp 129-133 (2008)

Chua, H.T., Tay, A., Wang, Y. and Wu, X. A heater plate assisted bake/chill system for photoresist processing in photolithography, Applied Thermal Engineering, 29: pp 985-997 (2008)

Do, D.K. Formation Tracking Control of Unicycle-Type Mobile Robots With Limited Sensing Ranges, IEEE Transactions on Control Systems Technology, 16:3, pp 527-538 (2008)

Do, D.K. and Pan, J. Boundary control of transverse motion of marine risers with actuator dynamics, Journal of Sound and Vibration, 318: pp 768-791 (2008)

Do, D.K. and Pan, J. Nonlinear control of an active heave compensation system, Ocean Engineering, 35: pp 558-571 (2008)

Duan, K. and Hu, X.Z. Asymptotic Analysis of Size Dependent Fracture Strength Using Boundary Effect Concept, Advanced Materials Research, 41-42: pp 125-133 (2008)

Dutta Roy, T., Wittek, A. and Miller, K.S. Biomechanical modelling of normal pressure hydrocephalus, Journal of Biomechanics, 41: pp 2263-2271 (2008)

Fillery, B.P., Hu, X.Z. and Fisher, G. A Practical Approach for Evaluation of Thermal Shock SIF's in Flexibly Restrained Edge Cracked Plates, Advanced Materials Research, 41-42: pp 157-167 (2008)

Fillery, B.P., Hu, X.Z. and Fisher, G. On the use of Mechanical Weight Functions for Practical Evaluation of Thermal Shock SIF's in Flexibly Restrained Edge-cracked Plates, Advanced Materials Research, 41-42: pp 113-123 (2008)

Ford, C.T., Qasim, T., Bush, M.B., Hu, X.Z., Shah, M.M., Saxena, V.P. and Lawn, B.R. Margin Failures in Crown-Like Brittle Structures: Off-Axis Loading, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 85B: pp 23-28 (2008)

Gao, L., Sun, G. and Kawi, S. A study on methanol steam reforming to CO2 and H2 over the La2CuO4 nanofiber catalyst, Journal of Solid State Chemistry, 181: pp 7-13 (2008)

Gao, L., Chua, H.T. and Kawi, S. The direct decomposition of NO over the La2CuO4 nanofiber catalyst, Journal of Solid State Chemistry, 181: pp 2804-2807 (2008)

Gao, L., Kiwi-Minsker, L. and Renken, A. Growth of carbon nanotubes and microfibers over stainless steel mesh by cracking of methane, SURFACE & COATINGS TECHNOLOGY, 202: pp 3029-3042 (2008)

Graham, B.F., May, E.F. and Trengove, R.D. Emulsion Inhibiting Components in Crude Oils, Energy & Fuels, 22: pp 1093-1099 (2008)

Guo, B., Shu, J., Wang, Z., Yang, H., Shi, L.H., Liu, Y. and Chen, L. Electrochemical reduction of nano-SiO2 in hard carbon as anode material for lithium ion batteries, Electrochemistry Communications, 10: pp 1876-1878 (2008)

Guzzomi, A.L., Hesterman, D.C. and Stone, B.J. Variable inertia effects of an engine including piston friction and a crank or grudgeon pin offset, Proceedings of the Institution of Mechanical Engineers Part D - Journal of Automobile Engineering, 222: pp 397-414 (2008)

Haq, M.B. and Rahman, M.K. A Comparative Study of Three Methods for Estimating Initial Gas-in-place in Gas Fields in Bangladesh, Petroleum Science and Technology, 26: pp 532-544 (2008)

Hesterman, D.C. Peer assessment of past exam scripts, Australasian Journal of Engineering Education, 14:2, pp 57-76 (2008)

Hopkinson, N. and Sercombe, T.B. Process repeatability and sources of error in indirect SLS of aluminium, RAPID PROTOTYPING JOURNAL, 14:2, pp 108-113 (2008)

Hu, X.Z. and Duan, K. Size effect and quasi-brittle fracture: the role of FPZ, International Journal of Fracture, 154: pp 3-14 (2008)

Jiang, F., Li, L., Zheng, Y., Yang, H. and Liu, Y. Cyclic ageing of Ti-50.8 at.% Ni alloy, Intermetallics, 16: pp 394-398 (2008)

Joldes, G.R., Wittek, A. and Miller, K.S. An efficient hourglass control implementation for the uniform strain hexahedron using the Total Lagrangian formulation, Communications in Numerical Methods in Engineering, 24: pp 1315-1323 (2008)

Keating, A., Antoszewski, J., Silva, B.D., Winchester, K.J., Nguyen, T.H.M., Dell, J.M., Musca, C.A., Faraone, L., Mitra, P., Beck, J.D., Skokan, M.R. and Robinson, J.E. Design and Characterization of Fabry-Pérot MEMS-Based Short-Wave Infrared Microspectrometers, Journal of Electronic Materials, 37:12, pp 1811-1820 (2008)

Lam, S., Halliday, K.G. and Qasim, T. The Effects of Cyclic Loading on Fracture Modes in Brittle Layer Structures: Relevance to Failure of Dental Crowns, Advanced Materials Research, 41-42: pp 21-26 (2008)

Leong, Y. Functional group interactions of adsorbed small charged bolaform molecules and their effects on intermolecular and surface forces in dispersions, Colloids and Surfaces A: Physiochemical and Engineering Aspects, 325: pp 127-131 (2008)

Leong, Y., Sganzerla, M., Berndt, C.C. and Campbell, G.R. Metal Ions Solubility in Plant Phosphoric Acid-Degree of Ammonia Neutralization and Temperature Effects, Industrial & Engineering Chemistry Research, 47: pp 1380-1385 (2008)

Leong, Y., Campbell, G.R., Yeow, Y.L. and Withers, J.W. Processing parallel-disk viscometry data in the presence of wall slip, Korea-Australia Rheology Journal, 20:2, pp 51-58 (2008)

Li, J. and Jeng, D.S. Response of a porous seabed around breakwater heads, Ocean Engineering, 35: pp 864-886 (2008)

Li, Q., Sun, X., Yu, J., Liu, Z. and Duan, K. Modeling and Analysis of Compressive Properties of Porous NiTi Shape Memory Alloy Using Artificial Neural Network, Advanced Materials Research, 41-42: pp 135-140 (2008)

Liu, C., Gao, Z.Y., An, X., Saunders, M., Yang, H., Wang, H.B., Gao, L.X. and Cai, W. Microstructure and magnetic properties of Ni-rich Ni54Mn25.7Ga20.3 ferromagnetic shape memory alloy thin film, Journal of Magnetism and Magnetic Materials, 320: pp 1078-1082 (2008)

Liu, X., Randall, R.B. and Antoni, J. Blind separation of internal combustion engine vibration signals by a deflation method, Mechanical Systems and Signal Processing, 22: pp 1082-1091 (2008)

Liu, X., Paurobally, M.R. and Pan, J. The Effect of Prestress on Vibration Behavior of Structures in Impedance Method Damage Detection, Advanced Materials Research, 41-42: pp 401-406 (2008)

Liu, Y., Mahmud, A.S., Kursawe, F. and Nam, T. Effect of pseudoelastic cycling on the Clausius-Clapeyron relation for stress-induced martensitic transformation in NiTi, Journal of Alloys and Compounds, 449: pp 82-87 (2008)

Liu, Y., Laeng, J., Chin, T. and Nam, T. Partial thermal cycling of NiTi, Journal of Alloys and Compounds, 449: pp 144-147 (2008)

Liu, Z., Yu, S., Yang, H., Wu, G. and Liu, Y. Phase separation and magnetic properties of Co-Ni-A1 ferromagnetic shape memory alloys, Intermetallics, 16: pp 447-452 (2008)

Liu, Z.Y., Sercombe, T.B. and Schaffer, G.B. Metal injection moulding of aluminium alloy 6061 with tin, POWDER METALLURGY, 51:1, pp 78-83 (2008)

Lv, G., Li, X., Huo, D., Sun, X., Chen, S., Tsai, C., Liu, Y. and Duan, K. Fabrication of Transparent YAG Ceramics From Co-precipitation Synthesized Nanopowders, Advanced Materials Research, 41-42: pp 271-276 (2008)

Mahmud, A.S., Yang, H., Tee, S., Rio, G. and Liu, Y. Effect of annealing on deformation-induced martensite stabilisation of NiTi, Intermetallics, 16: pp 209-214 (2008)

Mahmud, A.S., Liu, Y. and Nam, T. Gradient anneal of functionally graded NiTi, Smart Materials and Structures, 17: pp 1-5 (2008)

May, E.F., Graham, B.F., Chauhan, A.S. and Trengove, R. Shear and Electrical Property Measurements of Water-in-Oil Emulsions and Implications for Multiphase Flow Meters, Energy & Fuels, 22: pp 3308-3316 (2008)

May, E.F., Moldover, M.R. and Schmidt, J.W. Electric and magnetic susceptibilities of gaseous oxygen: Present data and modern theory compared, Physical Review A, 78: pp 032522-1 to 032522-15 (2008)

Mills, P.M., Wang, Y., Cicuttini, F.M., Stoffel, K.K., Stachowiak, G.W., Podsiadlo, P. and Lloyd, D.G. Tibio-femoral cartilage defects 3 to 5 years following arthroscopic partial medial meniscectomy, Osteoarthritis and Cartilage, 16:12, pp 1526-1531 (2008)

Morriss, L., Wittek, A. and Miller, K.S. Compression testing of very soft biological tissues using semi-confined configuration-A word of caution, Journal of Biomechanics, 41: pp 235-238 (2008)

Ong, B.C., Leong, Y. and Chen, S.B. Yield stress-zeta potential relationship of oxide dispersions with adsorbed polyacrylate - Steric effect and zeta potential at the flocculated-dispersed transition state, Powder Technology, 186: pp 176-183 (2008)

Pan, J. and Qiu, X. Performance of an active control system near a reflecting surface, Australian Journal of Mechanical Engineering, 5:1, pp 1-8 (2008)

Podsiadlo, P., Dahl, L., Englund, M., Lohmander, L.S. and Stachowiak, G.W. Differences in trabecular bone texture between knees with and without radiographic osteoarthritis detected by fractal methods, Osteoarthritis and Cartilage, 16:1, pp 323-329 (2008)

Podsiadlo, P., Wolski, M. and Stachowiak, G.W. Automated Selection of Trabecular Bone Regions in Knee Radiographs, Medical Physics, 35:5, pp 1870-1883 (2008)

Qasim, T., Hu, X.Z. and Bush, M.B. Indenter/coating modulus mismatches and load location effects on contact damage in curved brittle-based bi-layer structures, Advanced Materials Research, 41-42: pp 33-39 (2008)

Qasim, T. Coating/substrate Modulus Mismatches and Margin Geometry Effects on Contact Damage in Curved Brittle Coating Systems, Advanced Materials Research, 41-42: pp 49-55 (2008)

Qu, B., Sun, X., Xiu, Z., Kim, J.H., Dou, S., Liu, Y. and Duan, K. Effect of Boron Purity on Superconducting Properties of SiC Doped MgB2, Advanced Materials Research, 41-42: pp 253-258 (2008)

Schaare, S., Dyskin, A.V., Estrin, Y., Arndt, S., Pasternak, E. and Kanel-Belov, A. Point loading of assemblies of interlocked cube-shaped elements, International Journal of Engineering Science, 46: pp 1228-1238 (2008)

Sercombe, T., Jones, N., Day, R. and Kop, A. Heat treatment of Ti-6Al-7Nb components produced by selective laser melting, Rapid Prototyping Journal: the international journal on technologies for rapid product development and direct management, 14:5, pp 300-304 (2008)

Sheng, J., Liu, J., Zhu, W., Elsworth, D. and Liu, J.X. Stress Analysis of a Borehole in Saturated Rocks Under in situ Mechanical, Hydrological and Thermal Interactions, Energy Sources. Part A. Recovery, Utilization, and Environmental Effects, 30: pp 157-169 (2008)

Stachowiak, G.P., Podsiadlo, P. and Stachowiak, G.W. Automated classification of wear particles based on their surface texture and shape features, Tribology International, 41:1, pp 34-43 (2008)

Stachowiak, G.W. and Podsiadlo, P. 3-D Characterization, Optimization and Classification of Textured Surfaces, Tribology Letters, 32:1, pp 13-21 (2008)

Steens, N. and Pan, J. Transient vibration in a simple fluid carrying pipe system, Acoustics Australia, 36:1, pp 1-21 (2008)

Stoffel, K., Cunneen, S., Morgan, R., Nicholls, R.L. and Stachowiak, G. Comparative stability of perpendicular versus parallel double-locking plating systems in osteoporotic comminuted distal humerus fractures, Journal of Orthopaedic Research, June:1, pp 778-784 (2008)

Sturnieks, D.L., Besier, T.F., Hamer, P.W., Ackland, T.R., Mills, P.M., Stachowiak, G.W., Podsiadlo, P. and Lloyd, D.G. Knee strength and knee adduction moments following arthroscopic partial meniscectomy, Medicine and Science in Sports and Exercise, 40:6, pp 991-997 (2008)

Sturnieks, D.L., Besier, T.F., Mills, P.M., Ackland, T.R., Maguire, K.F., Stachowiak, G.W., Podsiadlo, P. and Lloyd, D.G. Knee joint biomechanics following arthroscopic partial meniscectomy, Journal of Orthopaedic Research, 26:1, pp 1075-1080 (2008)

Sun, Z., Wu, J. and Zhang, D. CO2 and H2O Gasification Kinetics of a Coal Char in the Presence of Methane, Energy & Fuels, 22: pp 2160-2165 (2008)

Tang, C.A., Liang, Z.Z., Zhang, Y.B., Chang, X., Tao, X., Wang, D.G., Zhang, J.X., Liu, J., Zhu, W. and Elsworth, D. Fracture spacing in layered materials: A new explanation based on two-dimensional failure process modeling, American Journal of Science, 308: pp 49-72 (2008)

Tian, B., Chen, F., Liu, Y. and Zheng, Y.F. Structural transition and atomic ordering of Ni49.8Mn28.5Ga21.7 ferromagnetic shape memory alloy powders prepared by ball milling, Materials Letters, 62: pp 2851-2854 (2008)

Tian, B., Chen, F., Liu, Y. and Zheng, Y.F. Effect of ball milling and post-annealing on magnetic properties of Ni49.8Mn28.5Ga21.7 alloy powders, Intermetallics, 16: pp 1279-1284 (2008)

Toh, I.K., O'Neill, P.L., Honnery, D. and Soria, J. Characterisation of the mean flow of a micro-injector induced swirling jet, Australian Journal of Mechanical Engineering, 5:1, pp 51-58 (2008)

Wahono, S., O'Neill, P.L., Kollmann, W., Soria, J. and Honnery, D. Direct Numerical Simulation of passive scalar mixing in axisymmetric swirling jets, Australian Journal of Mechanical Engineering, 5:1, pp 71-80 (2008)

Wang, C., Chen, H., Hu, X.Z. and Wang, Y. Dynamic Failure Analysis of Foam Sandwich Structure Using 3D Material Point Method, Advanced Materials Research, 41-42: pp 363-367 (2008)

Whitton, A., Qasim, T., Ford, C.T., Hu, X.Z. and Bush, M.B. The role of skirt geometry of dental crowns on the mechanics of failure: Experimental and numerical study, Medical Engineering & Physics, 30: pp 661-668 (2008)

Winby, C.R., Lloyd, D.G. and Kirk, T.B. Evaluation of different analytical methods for subject-specific scaling of musculotendon parameters, Journal of Biomechanics, 41: pp 1682-1688 (2008)

Wittek, A., Dutta Roy, T., Taylor, Z.A., Horton, A.T., Washio, T., Chinzei, K. and Miller, K.S. Subject-specific non-linear biomechanical model of needle insertion into brain, Computer Methods in Biomechanics and Biomedical Engineering, 11:2, pp 135-146 (2008)

Wu, J.P. and Kirk, T.B. Study of Altered Mechanical Properties of Articular Cartilage in Relation to the Collagen Network, Advanced Materials Research, 41-42: pp 9-14 (2008)

Wu, J.P., Kirk, T.B. and Zheng, M.H. Study of the collagen structure in the superficial zone and physiological state of articular cartilage using a 3D confocal imaging technique, Journal of Orthopaedic Surgery and Research, 3:29, pp 1-11 (2008)

Xiu, Z., Laeng, J., Sun, X., Li, Q., Hur, S.K. and Liu, Y. Phase formation of A12O3/Ti(C,N)-NiTi composite, Journal of Alloys and Compounds, 458: pp 398-404 (2008)

Xiu, Z., Liu, Y., Li, J., Huo, D., Li, X., Sun, X., Duan, K. and Hu, X.Z. Fabrication and Properties of Hydroxyapatite-Ti Network Composites, Advanced Materials Research, 41-42: pp 41-48 (2008)

Xiu, Z.M., Sun, X.D., Duan, K., Hu, X.Z. and Li, X.K. Effect of Sintering Conditions on the Properties of Al2O3/Ti(C,N) Ceramics, Advanced Materials Research, 41-42: pp 241-246 (2008)

Yang, S., Wu, Z., Hu, X.Z. and Zheng, J. Theoretical analysis on pullout of anchor from anchor-mortar-concrete anchorage system, Engineering Fracture Mechanics, 75: pp 961-985 (2008)

Yeow, L.Y., Guan, B., Wu, L., Yap, T. and Leong, Y. Obtaining the Evolving Concentration Distribution Curves During Binary Disintegration of Macromolecules, AICHE Journal, 54:10, pp 2699-2706 (2008)

Yeow, Y.L., Leong, Y. and Khan, A. Slow Steady Viscous Flow of Newtonian Fluids in Parallel-Disk Viscometer With Wall Slip, Journal of Applied Mechanics - transactions of the ASME, 75: pp 041001-1 to 041001-7 (2008)

Yeow, Y.L., Pepperell, C.J., Sabturani, F.M. and Leong, Y. New Development in Processing Pendant Droplet Tensiometry Data, Langmuir, 24: pp 10942-10949 (2008)

Yeow, Y.L., Pepperell, C.J., Sabturani, F.M. and Leong, Y. Obtaining surface tension from pendant drop volume and radius of curvature at the apex, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 315: pp 136-146 (2008)

Yoneyama, T., Scott, N.W., Kagawa, H. and Osada, K. Ski deflection measurement during skiing and estimation of ski direction and edge angle, Sports Engineering, 11: pp 3-13 (2008)

Yu, J., Sun, X., Li, Q., Li, X., Liu, Y. and Duan, K. Preparation of Open-cell Alumina Ceramic Foam with Uniform Cell Structure Using Plant Seed Template, Advanced Materials Research, 41-42: pp 265-270 (2008)

Zhang, H., Liu, J. and Elsworth, D. How sorption-induced matrix deformation affects gas flow in coal seams: A new FE model, International Journal of Rock Mechanics and Mining Sciences, 45: pp 1226-1236 (2008)

Zhao, L., Zhang, F., Hu, X.Z. and Huang, B. Study on Interlaminar Shear and Damage Behavior of Carbon Fiber Composites with Short Fiber Interleaves: 2. Micro-Mechanical Simulation, Advanced Materials Research, 41-42: pp 341-347 (2008)

Zhao, L., Zhang, F., Hu, X.Z. and Huang, B. Study on Interlaminar Shear and Damage Behavior of Carbon Fiber Composites with Short Fiber Interleaves: 1. The Comparative Test, Advanced Materials Research, 41-42: pp 335-340 (2008)

Zheng, Y., Jiang, F., Li, L., Yang, H. and Liu, Y. Effect of ageing treatment on the transformation behaviour of Ti-50.9 at.% Ni alloy, Acta Materialia, 56: pp 736-745 (2008)

Conference Publications

Ayoub, I., Lu, J., Dutta, B., Elliot, K., Stappenbelt, B. and Pan, J. An Experimental Study of the Effect of Splitter Plates on Vortex Induced Vibration, Acoustics 2008, Victoria, Australia, Australian Acoustical Society, 1: pp 1-5 (2008)

Berger, J., Horton, A.T., Joldes, G.R., Wittek, A. and Miller, K.S. Coupling Finite Element and Mesh-free Methods for Modelling Brain Deformation in Response to Tumour Growth, 2008 MICCAI Workshop - Computational Biomechanics for Medicine, USA, Kitware Inc, 1: pp 1-14 (2008)

Bergheim, P.V. and Thiagarajan, K.P. The air-water sloshing problem: parametric studies on excitation magnitude and frequency, OMAE 2008, Portugal, ASME, 1: pp 1-7 (2008)

Do, D.K. Formation Tracking Control of Mobile Robots with Limited Sensing and without Velocity Measurements, 10th International Conference on Control, Automation, Robotics and Vision, Vietnam, IEEE, 1: pp 204-209 (2008)

Do, D.K. and Pan, J. Reducing Transverse Motion of Marine Risers with Actuator Dynamics by Boundary Control, 10th International Conference on Control, Automation, Robotics and Vision, Vietnam, IEEE, 1: pp 307-312 (2008)

Do, D.K. and Pan, J. Boundary Control of flexible marine risers, The 17th IFAC World Congress, South Korea, IFAC, 17: pp 6050-6055 (2008)

Do, D.K. and Pan, J. High Performance Control of an Active Heave Compensation System, The 17th IFAC World Congress, Korea, IFAC, 17: pp 5059-5064 (2008)

Domal, V.K. and Trevelyan, J.P. Comparing engineering practice in South Asia with Australia, 2008 ASEE Annual Conference & Exposition, Pittsburgh, PA, American Society for Engineering Education, 473: pp n/a (CD-ROM) (2008)

Domal, V.K., Stappenbelt, B. and Trevelyan, J.P. Professional development at university: student perceptions of professional engineering practice, Australian Association for Engineering Education 2008 Annual Conference, Queensland, Australian Association for Engineering Education, 1: pp 1-7 (2008)

Dyskin, A., Yong, D., Pasternak, E. and Estrin, Y. Stresses in topologically interlocking structures: two scale approach, ICTAM 2008, Adelaide, University of Adelaide, 1: (2008)

Dyskin, A.V. and Pasternak, E. Materials with Poisson's ratio near -1: properties and possible realisations, ICTAM 2008, Adelaide, University of Adelaide, 1: (2008)

Dyskin, A.V. and Pasternak, E. Rotational Mechanism of In-Plane Shear Crack Growth in Rocks Under Compression, SHIRMS 2008, Perth, Western Australia, Australian Centre for Geomechanics, 2: pp 99-110 (2008)

Geers, M.J. and Hodkiewicz, M.J. Expressing tacit knowledge: Bayesian networks for maintenance applications, 2008 ICOMS Asset Management Conference, Fremantle WA, Asset Management Council (The Maintenance Engineering Society of Australia Inc), 1: pp 1-12 (2008)

Hodkiewicz, M.J. Using the decision model development process to assist in knowledge management, ICOMS 2008 Asset Management Conference, Fremantle WA, Asset Management Council (The Maintenance Engineering Society of Australia Inc), 1: pp 1-10 (2008)

Joldes, G.R., Wittek, A., Miller, K.S. and Morriss, L. Realistic And Efficient Brain-Skull Interaction Model For Brain Shift Computation, 2008 MICCAI Workshop - Computational Biomechanics for Medicine III, New York, Kitware Inc, 1: pp 1-12 (2008)

Keating, A., Gager, M. and Clarke, D. Rapid prototyping of microfluidic devices using imprinting - application to microvalves and micropumps, Smart Materials, Nano+Micro-Smart Systems, Melbourne, Australia, RMIT University, 7269: pp 72690X-I to 72690X-II (2008)

Lai, M., Lai, C.T., Keating, A., Dell, J.M. and Liu, Y. Cross-flow Microfiltration for Lab-on-chip defatting of Human Breast Milk, Smart Materials, Nano+Micro-Smart Systems, Melbourne, Australia, RMIT University, 7270: pp 72700N-1 to 72700N-11 (2008)

Miller, K.S. and Nielsen, P.M.F. Computational Biomechanics for Medicine III, MICCAI 2008, New York, Kitware Inc, 1: pp 1-167 (2008)

Nair, S. and Trevelyan, J.P. Current maintenance management methods cannot solve engineering asset maintenance history data quality problem, ICOMS 2008 Asset Management Conference, Fremantle WA, Asset Management Council (The Maintenance Engineering Society of Australia Inc), 1: pp 1-8 (2008)

O'Neill, P.L. and Thiagarajan, K. Proceedings of the 5th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, 5th Australian Conference on Laser Diagnostics in Fluid Mechanics, Australia, The University of Western Australia, 1: pp CD-ROM (2008)

Rafiee, A. and Thiagarajan, K.P. Fluid-structure interaction simulation using an incompressible SPH method, ASME 27th International Conference on Offshore Mechanics and Arctic Engineering, Portugal, ASME, 1: pp 1-12 (2008)

Rakshit, D., Repalle, N., Putta, J. and Thiagarajan, K.P. A numerical study on the impact of filling level on liquid sloshing pressures, OMAE 2008, Portugal, ASME, 1: pp 1-8 (2008)

Razali, Z.B. and Trevelyan, J.P. Can practical intelligence from a laboratory experience be measured?, Australasian Association for Engineering Education 2008 19th Annual Conference, Queensland, Australasian Assiciation for Engineering Education, 1: pp 1-6 (2008)

Richardson, S.J., MacGeehan, D., Hodkiewicz, M.R. and Traianou, C. Modeling tool to support budgeting and planning decisions for pump overhauls, 2008 ICOMS Asset Management Conference, Fremantle WA, Asset Management Council (The Maintenance Engineering Society of Australia Inc), 1: pp 1-10 (2008)

Shen, K. Improving communication for people to take their responsibilities for RAMS in an organization, ICOMS 2008 Asset Management Conference, Fremantle WA, Asset Management Council (The Maintenance Engineering Society of Australia Inc), 1: pp 1-7 (2008)

Sireta, F.X., Thiagarajan, K.P., Molin, B. and Pistani, F. Hydrodynamic coefficients of porous plates and application to subsea deployment, The Marine Operations Specialty Symposium 2008, Singapore, National University of Singapore, 1: pp 1-5 (2008)

Trevelyan, J.P. A Framework for Understanding Engineering Practice, ASEE Annual Conference, Pittsburgh, American Society for Engineering Education, 1: pp 1-14 (2008)

Trevelyan, J.P. and Tilli, S. Longitudinal Study of Australian Engineering Graduates: Perceptions of Working Time, ASEE Annual Conference, Pittsburgh, American Society of Engineering Education, 1: pp 1-15 (2008)

Wadhwa, H. and Thiagarajan, K.P. PIV Study of Vortex Shedding Flow Pattern induced by Circular Disks in Heave Motion, 5th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, Perth, Western Australia, The University of Western Australia, 1: pp 35-38 (2008)

Wang, Y., Chua, H.T., Tay, A. and Fang, Z.P. Temperature Cycling for Photoresist Processing, 17th IFAC World Congress, 2008, Korea, IFAC, 1: pp 946-951 (2008)

White, E.T., Hardin, M.T., Chan, A.H.C. and Iswanto, N. Methods to evaluate growth rate kinetics parameters from experimental batch crystallization data, Chemeca 2008, NSW, Australia, Engineers Australia, 1: pp 446-454 (2008)

Wu, J.P., Kirk, T.B., Milne, N. and Delaney, P.M. Study of morphologic response of chondrocytes to uniaxial compression of articular cartilage, Sixth IASTED International Conference on Biomedical Engineering, Austria, ACTA Press, 601: pp 121-125 (2008)

Wyndham, D.A., James, T.D., Lim, G., Parish, G., Musca, C.A. and Keating, A. An in-situ monitoring system for characterizing porous silicon growth, Smart Materials, Nano+Micro-Smart Systems, Melbourne, Australia, RMIT University, 7267: pp 7267OR-1 to 7267OR-9 (2008)

Others

Trevelyan, J.P. Lets be seen and heard: engineers must shed their invisibility cloaks:, The Australian, :6 August 2008, Australia (2008)

Trevelyan, J.P. Observations of engineering practice: ideas for educators, 2008 Dane and Mary Louise Miller Symposium, Australia (2008)