Mechanical and Materials Engineering

Books and Chapters

Stachowiak, G.W. and Batchelor, A.W. Engineering Tribology, USA, BUTTERWORTH-HEINEMANN (2001)

Journal Articles

Chinzei, K. and Miller, K. Towards MRI guided surgical manipulator, Medical Science Monitor, 7:1, pp 153-163 (2001)

De Pellegrin, D.V. and Stachowiak, G.W. A New Technique for measuring particle angularity using cone fitting analysis, WEAR, 247: pp 109-119 (2001)

Dodd, A.C. and McCormick, P.G. Solid-state Chemical Synthesis of Nanoparticulate Zirconia, ACTA Materialia, 49: pp 4215-4220 (2001)

Dodd, A.C., Raviprasad, K. and McCormick, P.G. Synthesis of Ultrafine Zirconia Powders by Mechanochemical Processing, Scripta Materialia, 44: pp 689-694 (2001)

Dodd, A.C., McCormick, P.G. and Tsuzuki, T. Nanocrystalline zirconia powders synthesized by mechanochemical processing, Materials Science and Engineering A, A301: pp 54-58 (2001)

Dodd, A.C. and McCormick, P.G. Synthesis of Nanoparticulate Zirconia by Mechanochemical processing, Scripta Materialia, 44: pp 1752-1729 (2001)

Drew, S.J., Mannan, M.A., Ong, K.L. and Stone, B.J. The measurement of forces in grinding in the presence of vibration, International Journal of Machine Tools & Manufacture, 41: pp 509 - 520 (2001)

Favier, D., Orgeas, L., Ferrier, D., Poncin, P. and Liu, Y. Influence of manufacturing methods on the homogeneity and properties of nitinol tubular stents, J. de Physique IV, 11: pp Pr8-541-546 (2001)

Fox, N.J., Simpson, A.K. and Stachowiak, G.W. Sealed Capsule Differential Scanning Calorimetry ¿ An Effective Method for Screening the Evaluation of Oxidation Stability of Vegetable Oil Formulations, Lubrication Engineering, 57: pp 14-20 (2001)

Guo, J.N., Hodgson, M. and Pan, J. Active control of an off-axis noise source, Canadian Acoustics, 29:1, pp 13-17 (2001)

Kim, H.S., Estrin, Y. and Bush, M.B. Constitutive modelling of strength and plasticity of nanocrystalline metallic materials, Materials Science and Engineering A, 316:1-2, pp 195-199 (2001)

Kim, J.K., Sham, M.L., Sohn, M.S. and Hamada, H. Effect of hybrid layers with different silane coupling agents on impact response of glass fabric reinforced vinylester matrix composites, Polymer, 42:17, pp 7455-7460 (2001)

Liu, Y. and Favier, D. Stability of ageing-induced multiple-stage transformation behaviour in a Ti-50.15at%Ni alloy, J. de Physique IV, 11: pp Pr8-113-118 (2001)

McCormick, P.G., Galatsis, K., Wlodarski, W. and Cukrov, L.M. Gas Sensing Properties of Nanosized Tin Oxide Synthesised by Mechanochemical Processing, Sensors and Actuators B:Chemical, 77: pp 491-495 (2001)

McCormick, P.G., Tsuzuki, T., Ding, J. and Robinson, J.S. Nanopowders synthesized by Mechanochemical Processing, Advanced Materials, 13: pp 1008-1010 (2001)

Miller, K. and Chinzei, K. Mathematical Modelling of Brain Tissue Mechanical Properties for Computer and Robot Assisted Surgery, Journal of Mathematical Modelling and Scientific Computing, 13:1-2, pp 1-11 (2001)

Miller, K. How to test very soft sidegical tissues in extension?, Journal of Biomechanics, 34/5: pp 651-657 (2001)

Ming, R.S., Pan, J. and Norton, M.P. The measurement of structure-borne sound energy flow in an elastic cylindrical shell, Journal of Sound and Vibration, 242:4, pp 719-735 (2001)

Nishimura, C., McCormick, P.G. and Hwang, S. Compressive Mechanical Properties of Mg-Ti-C Nanocomposite Synthesised by Mechanical Milling, Scripta Materialia, 44: pp 2547-2462 (2001)

Nishimura, C., McCormick, P.G. and Hwang, S. Mechanical Milling of Magnesium Powder, Materials Science and Engineering A, A318:1-2, pp 22-33 (2001)

Nishimura, C., McCormick, P.G. and Hwang, S. Deformation Mechanism of Nanocrystalline Magnesium in Compression, Scripta Materialia, 44: pp 1507-1511 (2001)

Ong, T.S. and Yang, H. Symmetrical Cell for Electrochemical AC Impedance Studies of Lithium Intercalation into Graphite, Electrochemical and Solid-State Letters, 4:7, pp A89-A92 (2001)

Sohn, M.S., Hu, X.Z. and Kim, J.K. Impact damaged resistance of carbon fibre/epoxy composite laminates containing short Kevlar fibres, Polymers & Polymer Composites, 9:3, pp 157-168 (2001)

Stachowiak, G.B. and Stachowiak, G.W. The Effects of Particle Characteristics on Three-Body Abrasive Wear, WEAR, 249: pp 201-207 (2001)

Stachowiak, G.W. and Podsiadlo, P. Characterization and Classification of Wear Particles and Surfaces, WEAR, 249: pp 194-200 (2001)

Todaka, Y., McCormick, P.G., Tsuchiya, K. and Umemoto, M. Synthesis of Fe-Cu Ultrafine Particles by Mechanochemical Processing and their Characterization, Scripta Materialia, 44: pp 1797-1801 (2001)

Tsuzuki, T., McCormick, P.G. and Cukrov, L.M. SN02 Nanoparticles prepared by Mechanochemical Processing, Scripta Materialia, 44: pp 1787-1790 (2001)

Tsuzuki, T. and McCormick, P.G. Zno Nanoparticles Synthesised by Mechanochemical Processing, Scripta Materialia, 44: pp 1731-1734 (2001)

Tsuzuki, T. and McCormick, P.G. Mechanochemical Synthesis of Niobium Pentoxide Nanoparticles, Materials Transactions, 42: pp 1623-1628 (2001)

Wee, L., Stamps, R.L., Celinski, Z. and Skrzypek, D. Exchange bias in Fe/KNiF3 bilayers, Journal of Applied Physics, 89:11, pp 7555-7557 (2001)

Wee, L., Stamps, R.L. and Camley, R.E. Temperature dependence of domain-wall bias and coercivity, Journal of Applied Physics, 89:11, pp 6913-6915 (2001)

Wong, Y.K., Hu, X.Z. and Norton, M.P. Low and high cycle fatigue interaction in 316L stainless steel, Journal of Testing and Evaluation, 29:2, pp 138-145 (2001)

Zhang, S., McCormick, P.G. and Estrin, Y. The Morphology of Portevin-Le Chatelier Bands: Finite Element Simulation for Al-Mg-Si, ACTA Materialia, 49: pp 1087-1094 (2001)

Zhao, H., Hu, X.Z., Bush, M.B. and Lawn, B.R. Cracking of Porcelain Coatings Bonded to Metal Substrates of Different Modulus and Hardness, Journal of Materials Research, 16:5, pp 1471-1478 (2001)

Zhao, H., Hu, X.Z. and Bush, M.B. Grain Growth Phenomena in the Interface Region of alpha-Alumina Bilayer Composites, Journal of the American Ceramic Society, 84:8, pp 1865-1872 (2001)

Conference Publications

Chinzei, K. and Miller, K. MRI Guided Surgical Robot, Australian Conference on Robotics and Automation, Sydney, Australian Robotics & Automation Association Inc., 1: pp 50-55 (2001)

De Pellegrin, D.V. and Stachowiak, G.W. Abrasiveness of Particles Measured by Cone-Fit Analysis (CFA), Leeds-Lyon, International Tribology Conference, Oxford, UK, Elsevier, 39: pp 517-527 (2001)

Do, D.K. and Pan, J. Nonlinear robust fin roll stabilization of surface ships using neural networks, 40th IEEE Conference on Decision and Control, USA, IEEE, 1: pp 2726-2731 (2001)

Do, K.D. and Pan, J. Smooth Asymptotic Robust Fin Roll Stabilization of Surface Ships, Modelling, Identification, and Control, USA, ACTA Press, 1: pp 1-5 (2001)

Do, K.D. and Pan, J. Adaptive Robust Rudder-Roll Damping for Ships using Time Delay Control, Modelling, Identification, and Control, USA, ACTA Press, 1: pp 23-27 (2001)

Duan, K., Hu, X.Z. and Wittmann, F.H. Boundary effect on concrete fracture induced by non-constant fracture energy distribution, The 4th International conference on fracture mechanics of concrete and concrete structures, Lisse, The Netherlands, A.A.Balkema Publishers, 1: pp 49-55 (2001)

Fox, N.J., Simpson, A.K. and Stachowiak, G.W. Sealed Capsule Differential Scanning Calorimetry: Screening the Oxidation Stability of Vegetable Oil Formulations, International Tribology Conference, Fukuoka, Japan, Japanese Society of Tribologists, 1: pp 147-152 (2001)

Graindorge, S.L. and Stachowiak, G.W. The Role of Lipids in the Wear of Articular Cartilage, International Tribology Conference, Fukuoka, Japan, Japanese Society of Tribologists, 2: pp 1485-1490 (2001)

Guo, J.N. and Pan, J. Low frequency noise control - the next step for noise control and management?, Acoustics 2001, Canberra, ANU, 1: pp B3.4 1-6 (2001)

Liu, Y. and Venkatesh, C.D. Cerium Chloride Inhibition of High Strength Low Alloy Steel in Sulfide-Polluted Seawater, Corrosion & Prevention 2001, Melbourne, Australia, Australasian Corrosion Association Inc, 1: p Paper No. 81 (2001)

Miller, K. Non-linear Computer Simulation of Brain Deformation, 38th Annual Rocky Mountain Bioengineering Symposium, North Carolina, USA, ISA, 37, ISA Vol. 408: pp 179-184 (2001)

Miller, K. Biomechanics of Brain for Computer and Robot Assisted Surgery, International Workshop on Deformable Modelling and Soft Tissue Simulation, Bonn, Germany, Caesar Centre, Bonn, 1: pp 1-6 (2001)

Miller, K. Dynamic of the new UWA Robot, Australian Conference on Robotics and Automation, Sydney, Australian Robotics & Automation Association Inc., 1: pp 1-6 (2001)

Miller, K., Badyda, K., Dyjas, J. and Miller, A. Simulation of flow system dynamics, XL Conference on Modelling in Mechanics, Gliwice, Poland, Faculty of Applied Mechanics Press. Silesian University of Technology, 15: pp 245-250 (2001)

Nicholls, R.L., Miller, K. and Elliott, B.C. Impact Behaviour of the baseball with implications for player safety, 2001 Australian Conference of Science and Medicine in Sport, Perth, WA, Sports Medicine Australia, 1: pp 1-4 (2001)

Ostrogonac, R.S., Zywno, M.S., Niklasson, C., Irandoust, S. and Grunwald, N. Strategies to recruit woman into the field of engineering: an international perspective, 4th UICEE Annual Conference of Engineering Education, Thailand, UNESCO International Centre for Engineering Education, 1: pp 101-105 (2001)

Pan, J., Li, X.D., Tian, J. and Lin, T.R. Acoustics of Ancient Chinese Music Bells, Acoustics 2001, Canberra, ANU, 1: pp B2.1 1-6 (2001)

Podsiadlo, P. and Stachowiak, G.W. Rotationally and Scale-Invariant Pattern Recognition of Tribological Surfaces, Leeds-Lyon, International Tribology Conference, Oxford, UK, Elsevier, 39: pp 697-708 (2001)

Scott, N.W. and Stone, B.J. Teaching Two degree-of-freedom Vibration on the WWW, Australasian Association for Engineering Education 12th Annual Conference, Brisbane, Faculty of Built Environment, QUT, 1: pp 46 - 51 (2001)

Sohn, M.S., Hu, X.Z., Kim, J.K. and Hong, S.H. Drop weight impact damage characterization for carbon fibre/epoxy composite laminates, Korean Spring Annual Meeting on Composites, Chang-Won, Gyeong Sang Nam-Do, Korea, Korean Composite Materials Society (2001)

Stachowiak, G.B. and Stachowiak, G.W. The Effects of Particle Characteristics on Three-Body Abrasive Wear in Slurry, International Tribology Conference, Fukuoka, Japan, Japanese Society of Tribologists, 1: pp 473-478 (2001)

Stachowiak, G.W. and Podsiadlo, P. The Application of the Modified Partitioned Iterated Function System (PIFS) to the Characterization and Classification of Wear Particles and Surfaces, International Tribology Conference, Fukuoka, Japan, Japanese Society of Tribologists, 1: pp 251-256 (2001)

Sum, K. and Pan, J. Medium Frequency Response of Sound Field in Closures with Modally Reactive Boundaries, The 8th International Congress on Sound and Vibration, Hong Kong, China, The Hong Kong Polytecnic, China, 1: pp 813-820 (2001)

Sum, K. and Pan, J. Estimation of Reverberation Time using Band-Limited Power Flow Method, The 2001 International Congress and Exhibition on Noise Control Engineering, Maastricht, The Netherlands, Nederlands Akoestisch Genootschap, 5: pp 2253-2258 (2001)

Turnbull, M.J. and Stone, B.J. The Importance of Laboratories in Student Understanding, Australasian Association for Engineering Education 12th Annual Conference, Brisbane, Faculty of Built Environment, QUT, 1: pp 480 - 485 (2001)

Wong, Y.K., Hu, X.Z. and Norton, M.P. Plastically dominant/elastically dominant fatigue interaction, The 10th International Conference on Fracture, Oxford, England, Elsevier Science Ltd (2001)

Others

Kandula, M., Margasahayam, R., Norton, M.P. and Caimi, R.E. Acoustical and Flowfield Characterization of a Scaled Tabletop Rocket, :NASA/TM-2001-210262, pp 1-16, JFK Space Center, Florida, USA (2001)